AD 80-08-01 R1

final rule

BOEING Model 727 Airplanes

AD Number
80-08-01 R1
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.

Applicability

TypeManufacturerModelDetails
aircraft The Boeing Company 727-100 Series BOEING Model 727 Airplanes
aircraft The Boeing Company 727-100C Series BOEING Model 727 Airplanes
aircraft The Boeing Company 727-200 Series BOEING Model 727 Airplanes
aircraft The Boeing Company 727-200F Series BOEING Model 727 Airplanes
aircraft The Boeing Company 727 Series BOEING Model 727 Airplanes
aircraft The Boeing Company 727C Series BOEING Model 727 Airplanes

Unsafe Condition

The absence of proper placarding on the aft ventral stairway could lead to misuse of the emergency exit as a normal passenger access, increasing the risk of structural failure or passenger injury.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Install a placard with one-half inch red letters on a white background stating 'Emergency Exit Only, Not for Normal Passenger Use' on sidewall panel P/N 65-70711 or an approved location. Alternatively, reinstall original or equivalent aft stairway panels per FAA approval.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Before July 1, 1981

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Boeing Model 727 airplanes in passenger service with aft ventral stairway panels removed

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Placard On Aft Stairway

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_80-08-01_R.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
80-08-01 R1
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 727 Airplanes
Subject:
Placard On Aft Stairway
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
01/05/1981
Make:
The Boeing Company
Model:
727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 80-08-01 R1
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-4003

AD NUMBER:   80-08-01 R1

SUBJECT HEADING:   BOEING Model 727 Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective January 5, 1981.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
80-08-01 R1 BOEING: Amendment 39-3735 as amended by Amendment 39-4003. Applies to all Model 727 airplanes in passenger service: Before July 1, 1981, accomplish either A or B on all Model 727 airplanes operating in passenger service with the aft ventral stairway panels removed.

A. Normal passenger access to the ventral stairway is not permitted. Install a conspicuous placard having one-half inch high red letters on a white background containing the words, "Emergency Exit Only, Not for Normal Passenger Use," on the ventral stairway sidewall panel P/N 65-70711 or in a location approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Region. Alternate methods of compliance may be approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Region.

B. Install the original panels per FAA approved type design or other panels found to be equivalent by the FAA. An FAA Maintenance Inspector may determine if other than original panels are acceptable or designs may be submitted to the Chief, Engineering and Manufacturing Branch, FAA Northwest Region for approval.

Amendment 39-3735 became effective April 17, 1980.

This amendment 39-4003 becomes effective January 5, 1981.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_80-08-01_R.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
80-08-01 R1
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 727 Airplanes
Subject:
Placard On Aft Stairway
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
01/05/1981
Make:
The Boeing Company
Model:
727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 80-08-01 R1
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-4003

AD NUMBER:   80-08-01 R1

SUBJECT HEADING:   BOEING Model 727 Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective January 5, 1981.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
80-08-01 R1 BOEING: Amendment 39-3735 as amended by Amendment 39-4003. Applies to all Model 727 airplanes in passenger service: Before July 1, 1981, accomplish either A or B on all Model 727 airplanes operating in passenger service with the aft ventral stairway panels removed.

A. Normal passenger access to the ventral stairway is not permitted. Install a conspicuous placard having one-half inch high red letters on a white background containing the words, "Emergency Exit Only, Not for Normal Passenger Use," on the ventral stairway sidewall panel P/N 65-70711 or in a location approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Region. Alternate methods of compliance may be approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Region.

B. Install the original panels per FAA approved type design or other panels found to be equivalent by the FAA. An FAA Maintenance Inspector may determine if other than original panels are acceptable or designs may be submitted to the Chief, Engineering and Manufacturing Branch, FAA Northwest Region for approval.

Amendment 39-3735 became effective April 17, 1980.

This amendment 39-4003 becomes effective January 5, 1981.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.